3

Basic Info.

Model NO.	ST-HPDC-EU-US-JAP
Production Capacity	100PCS/Month

Product Description

3-in-1 DC charger tester
ST-HPDC-EU&US&JPN
Product Overview
Saiter Three-in-one DC charger tester ST-HPDC-EU&US&JPN is a powerful detection equipment that integrates the American standard,European standard and Japanese standard test functions. Mainly used in EV conductive charger field third party inspection and product acceptance function verification,suitable for the car charger manufacturer research and development,the third party testing institutions in the laboratory inspection, also can be widely used in charging facilities manufacturers of electric vehicle conduction charger, early research and development debugging, factory testing, and the car charger buyers, testing units for laboratory testing.

Product Features
1.

1.	Interoperability test and communication protocol consistency test: ST-HPDC-EU&US&JPN supports interoperability specification test for EV DC charger (machine), communication protocol consistency test, and BMS simulation test function.	4.	It can meet the needs of laboratory testing, convenient to put in the laboratory cabinet, and complete the test while occupying reasonable space. In order to meet the laboratory test standards, the overall structure is stable, strong anti-interference ability
2.	Equipped with RS232 connected computer equipment, optional multi-channel high-precision high-speed waveform acquisition module, used to collect charging voltage, current, guide signal, etc., to meet the needs of equipment mutual operation test. Optional 0.05 level verification test project, can complete the 0.05 level metrological verification test function	5.	The appearance is beautiful, the upper computer interactive interface has complete functions, and can easily and quickly meet the tester to carry out a series of test operations on the charging pile
3.	Vehicle control guide circuit simulation function, truly simulate the vehicle charging process; support charging voltage, current, power, state display and charging timing diagram display; support EVCC parameter setting, EVSE parameter display and message cycle setting.	6.	The battery voltage can test the battery compatibility of charging pile; with special calibration terminals; equipped with high power output load interface to connect the load equipment; in addition, the vehicle control guide circuit can simulate the vehicle charging process

Technical Parameters

Product Name	Three-in-one DC charger tester
Model	ST-HPDC-EU&US&JPN
Working power supply	100-240V AC,50-60Hz ;50W
Dimension	L585*W615*H435 mm
bearing power	≤300A (optional 500A)
With the upper computer software	Yes
Environment requirement	Working temperature: - 20 ºC~50 ºC Storage temperature: - 30 ºC~70 ºC Relative humidity: ≤ 90% Rh (10 ºC to 30 ºC); ≤ 75% Rh (30 ºC to 40 ºC); ≤ 45% Rh (40 to 50 ºC)
Standard	European standard / American standard
Number of gun seats / parameters	1 gun (DC1000V300A(optional 500A))
Voltage / current sampling	±0.5%RD(200V≤U≤750V/±0.5%RD(10A≤ | ≤250A)
Connectors	RS232 / network port
Reference standards	lSO 15118-2019,DIN SPEC70121-2012. IEC-61851-1-2017, IEC-61851-23-2014,SAEJ1772-2017
Standard	Japanese standard
Number of gun seats / parameters	1 gun (DC600V200A )
Voltage / current sampling	±0.5%RD(200V≤U≤750V)/±0.5%RD(10A≤I≤250A)
Connectors	RS232 / network port
Reference standards	CHAdeMO-1.0.1

Program Interface

Saiter Tech was established in 2015 in Shenzhen China, specialized in developing test systems for E-vehicles and EV chargers.
With a clear customer-centric approach, we aim to ensure your EV and EV chargers conformity, safety and reliability. Based on more than 5 years development, we have created mini, portable and integrated test systems - complying with GB/T, CCS(IEC/ISO/DIN/SAE) and CHAdeMO standards.

Whether mobile, laboratory racks in test E-vehicles or EV chargers, we can fulfil your demands.
Thanks to the innovative Saiter system, we can always find a solution which is precisely matching your needs.